HOME

ASAD

ASAD-Lt (Lite)

DOWNLOAD 

SUPPORT 

TRAINING

ORDER 

E-MAIL 

 

 

 

 

Updated 01/19/11


Key Benefits Features Customers Screen images Pricing Download

Frequently Asked Questions (FAQ)

Print Information & Order Form (pdf)

Key Benefits
Saves Your Firm Time & Money

ASAD does much of the basic number crunching for you by automatically computing pipe lengths and sizes, as well as inlet/manhole elevations and drainage areas. Storm sewer design is tied to the roadway geometry, so that recovery from roadway alignment changes (vertical and/or horizontal) takes seconds instead of hours if performed manually. Plans are drawn automatically from information stored in the storm sewer database. Any changes in the storm sewer (i.e., pipe size, length, inlet type, elevations, etc.) will automatically appear the next time you draw the plan view, profile or cross-section.

Creates a better design

Because ASAD lets the user change the storm sewer configuration quickly, the user can try numerous "what-if" scenarios to optimizer for cost, hydraulics, outfall locations, inlet spacing, or any combination of these.

Increases Accuracy & Provides Consistent Results

ASAD creates structure numbering, as well as structure and pipe quantities and descriptions that are consistent throughout the project including: Hydraulic calculations & reports, CAD-drawn construction plans and annotation (plan, profile, and cross-section views), and Quantity tabulations and cost estimates.

Meets Department of Transportation Design Standards

ASAD uses standard state DOT-defined drainage structures (inlets/manholes/ditch bottom inlets) for both hydraulic analysis and CAD drafting. The user also can create other non-standard structures as needed.

Features
Hydraulics
  • Up to 1000 nodes per system
  • Maximum of 50 systems per project
  • Runoff computed using the rational method
  • Full and partial flows supported
  • Computes backwater curve with junction and exit loss options
  • Roadway spread analysis using HEC-12 method
  • Time of concentration worksheet, TR-55 and Kinematic wave.
Automatic Calculations
  • Pipe sizing
  • Pipe lengths (structure center-to-center & actual quantity lengths)
  • Inlet / Top / Grate elevations
  • Onsite drainage areas
  • Pipe invert elevations
  • Plans Production
    • Drainage structure cross-sections drawn
    • Storm sewer drawn in plan view
    • Profile view of storm sewer with hydraulic and energy grade lines
    • Cross section pattern lines drawn at each node location. These lines may be used by other software such as GEOPAK to generate the existing and proposed roadway cross sections.
    • Drawings annotated to user specifications
    • All plans production tools draw directly into Intergraph/MicroStation CAD format files (*.dgn)
    Reports
    • Storm sewer hydraulic tabulation
    • Summary of drainage structures (drawn directly into CAD file)
    • Roadway spread analysis report
    • Time of concentration worksheet
    • Underground utility conflicts
    • Profile elevation report
    • Storm sewer cost analysis
    • others...
     
    Customers
    A.R. MILLER, INC. ICON CONSULTING GROUP, INC.
    AMERICAN CONSULTING ENGINEERS, PLC INTERNATIONAL ENG. CONSULTANTS, INC.
    APCTE Corporation INWOOD CONSULTING ENGINEERS, INC.
    AREFCO International JACOBS,  INC.
    AVID ENGINEERING, INC. K-F GROUP, INC.
    AYRES & ASSOCIATES, INC. KAISER ENGINEERS, INC.
    BARAN ENGINEERING CORP. KEITH & BALLDE, INC.
    BASKERVILLE-DONOVAN, INC. KEITH & SCHNARS, PA.
    BEISWENGER, HOCH & ASSOCIATES, INC. KELLY, COLLINS & GENTRY, INC.
    BERMELLO, AJAMIL & PARTNERS, INC. KIMLEY, HORN & ASSOCIATES, INC.
    BERRYMAN & HENIGAR, INC. KISINGER CAMPO & ASSOCIATES CORP.
    BESSENT, HAMMACK & RUCKMAN, INC. KNIGHT, McGUIRE and ASSOCIATES
    BOWEN CIVIL ENGINEERING, INC. LAST DEVENPORT, INC.
    BOWYER, SINGLETON & ASSOCIATES, INC. LAWSON, NOBLE & WEBB, INC.
    BOYLE ENGINEERING CORP. LBFH
    BRISKEY & ASSOCIATE ENGINEERS, INC. LOCHRANE ENGINEERING, INC
    BROWARD COUNTY LPA GROUP INC.
    C3TS, INC. LU-C ENGINEERING INC.
    CAPTEC ENGINEERING, INC. M. J. QUINN & ASSOCIATES, INC.
    CARLAN KILLAM CONSULTING GROUP, INC. MARLIN ENGINEERING, INC.
    CARR SMITH CORRADINO, INC. METRIC ENGINEERING, INC.
    CARTER & BURGESS MOORE SURVEYING & DESIGN, INC.
    CARTER CONSULTING ENGINEERS, INC. MORALES SHUMER & MOCK ENGINEERING, INC.
    CH2M HILL ORTH-RODGERS and ASSOCIATES, INC.
    CITY OF PORT ST. LUCIE PARSONS - BRINKERHOFF
    CITY OF WINTER PARK PARSONS TRANSPORTATION GROUP
    CIVIL DESIGN, INC. PBSJ, INC.
    CIVIL SCIENTIFIC, INC. PITMAN-HARTENSTEIN & ASSOCIATES, INC.
    COMPREHENSIVE ENGINEERING SERVICES, INC. PROFESSIONAL ENGINEERING CONSULTANTS, INC.
    CONNELLY & WICKER, INC. PROTEAN DESIGN GROUP, INC.
    CONSUL-TECH ENGINEERING, INC. RAM PROFESSIONAL GROUP
    EARTHTECH CONSULTING, INC. RCT ENGINEERING, INC.
    EBS ENGINEERING, INC. REYNOLDS, SMITH & HILLS
    EDWARDS & KELCEY, INC. RUDD JONES PE & ASSOCIATES, PA
    ENGINEERING AND ENVIRONMENTAL DESIGN STANLEY CONSULTANTS, INC.
    ENGLAND, THIMS & MILLER STILLWATER TECH, INC.
    ESCAMBIA COUNTY - INFO. RES./DATA PROCES. STONE, JOCA & MAHONEY, INC.
    FIRST FEDERAL SAVINGS BANK SW FLORIDA WATER MANAGEMENT DIST.
    FLORIDA DEPT OF TRANSPORTATION T.Y.LIN INTERNATIONAL
    GAI CONSULTANTS SE, INC. TAMPA BAY ENGINEERING, INC.
    GEE & JENSON, INC. TOMASINO & ASSOCIATES, INC.
    GREENHORNE & O'MARA, INC. TRANSYSTEMS COPORATION
    GTC ENGINEERING CORP. URS GREINER, INC.
    H.W. LOCHNER, INC. VANESSE, HANGEN, BRUSTLIN
    HARDING LAWSON ASSOCIATES, INC. VOLKERT & ASSOCIATES, INC.
    HARTMAN & ASSOCIATES, INC. WADE-TRIM ENGINEERING, INC.
    HDR ONE COMPANY WASHINGTON INFRASTRUCTURE SERVICES, INC.
    HELLE ENGINEERING CORP. WILBUR SMITH ASSOCIATES, INC.
    HNTB CORPORATION WILLIAMS HATFIELD & STONER
    HSQ GROUP, INC. WILSON-MILLER, INC.
    Pricing

    Description Licenses Price
    ASAD (ver 3.x.x) each $1,500
    Annual Support & Upgrades each/yr $575